How to Backwash Sawyer Squeeze Filter

The Sawyer Squeeze Filter is a great tool for filtering water while hiking or camping. However, it is important to backwash the filter regularly to keep it working properly. This guide will show you how to backwash your Sawyer Squeeze Filter quickly and easily.

How to Backwash Sawyer Squeeze Filter – The Perfect Guide

What You Need for Backwash Sawyer Squeeze Filter:

  • Filter media (usually a pleated filter cartridge)
  • Filter housing
  • Backwash valve
  • Pipe or hose to connect the backwash valve to a water source
  • Drainage system to collect and dispose of the backwash water

The Sawyer Squeeze Filter is a great tool for filtering water while backpacking, hiking, or camping. It’s simple to use and easy to clean, making it a great choice for anyone who wants clean drinking water without having to lug a heavy filter around. Here’s how to backwash your Sawyer Squeeze Filter to keep it clean and working properly.

1. Fill the clean side of the Sawyer Squeeze Filter with clean water.

2. Place the filter on the dirty water side of the container.

3. Pump the filter slowly until the water starts to flow through.

4. Once the water starts flowing, pump the filter quickly for 30-60 seconds.

5. Remove the filter from the container and let the dirty water drain out.

6. Repeat steps 1-5 until the water coming out of the filter is clear.

7. Rinse the filter with clean water and let it air dry before using it again.

What Is Sawyer Squeeze Filter?

The Sawyer Squeeze Filter is a water filter designed for use in backcountry and emergency situations. The filter uses a hollow-fiber membrane to remove bacteria, protozoa, and cysts from water, making it safe to drink. The filter is capable of filtering up to 0.1 microns, making it one of the most effective filters on the market. The Sawyer Squeeze Filter is easy to use and comes with a variety of adapters to fit most water bottles and hydration systems.

How Does the Sawyer Squeeze Filter Work?

The Sawyer Squeeze filter is a small, portable water filter that can be used to remove contaminants from water. It is made of ABS plastic and features a 0.1-micron filter. The filter is designed to be attached to a drinking straw so that the user can drink directly from the water source.

The Sawyer Squeeze filter can be used to remove protozoa, bacteria, and parasites from water. It is also effective at removing sediment and chemicals. The filter can be used to purify water from any source, including lakes, rivers, and streams.

How Often Should You Backwash a Sawyer Water Filter?

Sawyer water filters are becoming increasingly popular, as they are a great way to filter out harmful chemicals and bacteria from water. However, backwashing the filter is an important part of keeping it functioning properly. How often should you backwash your Sawyer water filter?

The answer to this question depends on a few factors, including the type of Sawyer water filter you have, the amount of water you filter, and the level of contamination in your water. In general, you should backwash your Sawyer water filter whenever the flow rate slows down or when the filter becomes difficult to pump

Maintenance of Sawyer Squeeze Filters

Sawyer squeeze filters are an excellent way to filter water while on the go, but they do require a bit of maintenance in order to keep them working properly. Here are a few tips for keeping your Sawyer squeeze filter in good condition:

  • Always make sure the filter is completely dry before storing it.
  • If the filter becomes clogged, use a soft bristle brush to clean it.
  • Be sure to check the gaskets and seals for wear and tear, and replace if necessary.
  • Replace the filter cartridge every 6-12 months, or sooner if it becomes damaged


This article provides instructions on how to backwash the Sawyer squeeze filter. This is an important step to keep the filter functioning properly. By following these instructions, you can ensure that your filter will continue to provide clean water.


How do you backwash a Sawyer squeeze?

Squeeze backwashing is a simple and efficient method of cleaning Sawyer filters. All you need are some water, soap, and the filter itself. Place the filter in your sink or Tekonome bucket so that it is completely submerged. Fill the basin with enough water to cover thefilter—about two cups should be sufficient. Add enough soap to make a thick paste, stir well, and pour into the bottom ofthe container on top ofthe filter. Swish around gently for about 30 seconds or until allof the suds have disappeared.

How often do you backwash Sawyer filter?

Backwashing the Sawyer filter should be done every 3-6 months, depending on how heavily your water is used. Backwashing cleanes and restores the filtering system, which helps to reduce chlorine residuals and improve taste and odor.

How do you unclog a Sawyer filter?

If your Sawyer filter is clogged, the best way to get it unclogged is by using a plunger. You can insert the plunger into the filtration chamber and push and pull until the blockage has been removed. If this doesn’t work, then you may need to take it in for repair or replacement. Always check with your manufacturer’s warranty before repairing or replacing any aquatic equipment.

How do you backwash a water filter?

There are a few different ways to backwash a water filter, but the most common is to pour white vinegar through the filter. You can also add baking soda or another type of acidifier to the mix. Make sure that you do not use chlorine bleach, which could damage your filter and cause it to fail prematurely. Finally, always wait at least 24 hours after using any type of backwashing agent before using tap water again.

Leave a Comment

Your email address will not be published. Required fields are marked *